Acheter des écrans Lenovo pour ThinkPad et IdeaPad à bas prix

With a bit of technical knowledge and a manual specific to your notebook this could be possible.

We recommend letting a specialist do it.

Here a video as an example:

• In most cases a flickering of the display indicates its defect, then it will have to be swapped.
• In some cases it can be the display cable, then the display will not have to be exchanged.

Vertical or horizontal lines are almost always a sign for a display damage.

A display damage is also indicated by lines that (dis-)appear when the display is pressed on.

In this case the display has to be exchanged.

If the Display is black, but the Desktop can still be seen a bit, this means, that the background light has died.

Some of the errors could be:

• A defective inverter or CCFL tube
• A broken cable
• The switch detecting whether the lid is open or closed could be stuck
• There could be a damage on the Mainboard.

In most cases it is probably best if you send your device in for repair to a specialist.

Both are methods of connecting internal displays in devices like laptops or all-in-one PCs. LVDS stands for Low Volatage Differntail signaling and only specifies, that signals are transmitted using a lower voltage than usual. This allows higher data rates due to lower crosstalk and interference. When talking about the connection of a display via LVDS, the protocol FPD-Link (Flat Panel Display Link) is usually meant, which uses LVDS. This protocol has been introduced in 1996 and has been the main way of connecting internal displays for a long time. However, with the steady increase in the resolution of displays, FPD is reaching its limits.

That is why in 2008 Embedded DisplayPort (EDP) has been introduced. It is based on the external connection DisplayPort and is constantly being refreshed. It has no problem connecting displays with a 4K resolution at over 60Hz refresh rate, whereas LVDS is over at FHD (1080p).

The difference is in the surface of the display. A matt display has a slightly ruff surface. This greatly reduces reflections, which is very beneficial for working in rooms with bright lights or outdoors. Additionally, fingerprints and dust are not so visible.

However glossy displays also have their advantages. Due to the extremely smooth surface the picture is a bit sharper and colors and contrast are also better, provided the display beneath the coating is good enough. Professional movie and photo editing monitors often use a glossy display in combination with a large anti-glare shield for the optimal image.

TN, short form of Twisted Newmatic, panels have been the standard for flat-panel displays for a long time. Now they are being replaced by IPS (In-Plane-Switching) panels. The biggest disadvantage of TN panels is, that they only display a relatively small number of colours and that they have bad viewing angles. That means that if you don’t look at the panel in a 90° angel the colours quickly appear dull and distorted.

IPS displays solve these problems, they even show correct colours when looking at them almost at a 180° angle. However they still have some disadvantages compared to TN panels. They generally have a higher response time which means they take longer to display an image on screen. This is why gamers sometimes still prefer TN panels.

The digitizer is a part of the display; however, it does not display any images. Its main function is to protect the LCD underneath and it also handles touch input, if touch is present.

The  LCD unit underneath the digitizer consists of the backlight and the LCD, which handles the colors of each pixel.

The display unit is all of this together. So, it contains the digitizer, LCD, backlight and usually a frame around all of it.

Nowadays, there are dozens of slightly different display resolutions for laptops and monitors. In order to stay on top of things, we created an overview of the most important ones.

Only displays that are specifically made for your notebook are compatible.

• There are displays with different kinds of backlights. Either CCFL or LED lights are used only the type that is already in use will fit.
• Size and resolution also have to be identical.

You have to measure the diagonal of your display by measuring from one corner to the opposite one.

You might have to convert from cm to inches. 1 inch is 2,54 cm, so a 19" display would also be a 48cm display.

Das Öffnen eines Laptops erfordert Sorgfalt, das richtige Werkzeug und etwas Erfahrung.

Grundregeln beim Öffnen:

• Gerät vollständig vom Strom trennen und, falls möglich, Akku entfernen bzw. stromlos schalten.
• Geeignetes Feinmechanik‑Werkzeug und ESD‑Schutz verwenden.
• Gehäuseschrauben systematisch lösen und Bodenabdeckung vorsichtig mit einem Kunststoff‑Tool abheben.
• Keine Gewalt anwenden – viele Geräte besitzen versteckte Schrauben unter Gummifüßen oder Aufklebern.

In unserer Reihe „Mein Laptop von innen“ zeigen wir anschaulich, wie verschiedene Notebook‑Modelle aufgebaut sind und welche Schritte nötig sind, um sie sicher zu öffnen.

Die Videos helfen dir, die Bauweise unterschiedlicher Marken (z. B. HP, Lenovo, Dell, Acer) besser zu verstehen und zeigen, wo sich Akku, Mainboard oder RAM befinden.
Wenn du dir beim Öffnen unsicher bist oder fest verbaute Komponenten besitzt, übernehmen unsere Techniker in der Werkstatt den sicheren Ausbau und die Reparatur.

The part number can be found on the back of your Display, however finding it requires disassembly of your notebook.

• Can I swap my notebook display myself

• You can measure the diagonal of your display by measuring from one corner to the opposite one.
• If you need to you can then convert it from cm to inches or vice versa (1 inch = 2,54 cm) to get the desired measurement.
• Some sticker on the device can also contain further information about the Display.
• If you can not find any information you will have to remove the display to see its part number on the back.

• Can I swap my notebook display myself

When manufacturing a Display there can be errors in some pixels. This will result in the pixel or sub-pixel not letting any light pass or never blocking light. If a complete pixel is defective it will either be black or white. However, the same error can also occur in a subpixel, which will then result in it always/never displaying its respective color (either red, green or blue). Due to the very high number of pixels such errors are almost impossible to avoid, and that is why displays with a few pixel errors are still shipped.